Tips From the Moving Company Pros: The Best Ways To Move a Pinball Machine



With pinball making a big revival throughout the country, Gentle Giant wishes to make certain that these classic, gorgeous devices remain damage-free while being transported. Oh, and we want individuals moving them to be safe, too.

In the beginning look, pinball machines can appear intimidating to move since of their fragility, size, and weight. Thankfully, our experienced Giants have a couple of techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

The majority of modern pinballs (made in the last 20 years or two) have a hinge system which permits the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or four bolts. All Electro-Mechanical pinballs utilize this system, in addition to the early Strong State machines.

Later makers have hinges and utilize a locking system to keep the headbox upright. There may also be two bolts inside as added safety, in case the lock is broken or mistakenly un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you need to remove the headbox rear access panel to acquire access to the bolts and plugs within. Normally this panel has a lock on it to keep it in location, however with time the key may have been lost. On a regular basis, there is a screw keeping this panel in place.

When within, get rid of the bolts and disconnect the big connectors that have wiring going down into the device. You might wish to identify these adapters to put them back in the ideal area, however they should be different sizes, making it difficult to plug back incorrectly.

You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs

For early Strong State Pinballs, you will have to eliminate the back glass. There is a lock situated on the headbox in one of 3 areas: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

As soon as opened, get rid of the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by lifting the latch located on either the left-hand side or right-hand side. The panel can now swing out towards you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to raise up the light panel in order to swing it open.

Now that you are inside, you can remove the bolts, and any plugs that have wires going down into the machine. You may wish to label these plugs to put them back in the right spot. You may not have to remove the plugs, as the wiring should be long enough to allow the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the latch 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You need to get inside if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will need to get rid of the display screen panel. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Eliminate the two bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in location.
Getting rid of the Legs.

Pinball Machine legs are held in place by eight bolts. The modern-day pinballs have captive nuts or threaded plates inside for the bolts to screw into.

However these threaded plates and captive nuts can be harmed, and the usage of extra nuts may have been required. If this is the case, you will have to open up the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Then slide out the playfield glass, and put in a safe place. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You ought to now have access to any nuts that may have been used. Once any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or remember which legs are for the front and back, as they will be adjusted in a different way to match.
Filling the Pinball.

You are now prepared to transfer your pinball machine. Before you fill it, make certain you eliminate the pinballs so they don't bounce around during transport.

It might be much easier to eliminate the legs just prior to loading the machine if you are moving the pinball utilizing a van or SUV. Source Get a pal to assist and have one of you supporting the pinball, while the other gets rid of the front legs. Move the device in, and then remove the back legs. It is much easier to fill the device front.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop all of a sudden!

For Electro-Mechanical pinball machines, you require to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it might be simpler to remove the legs just prior to filling the device. Grab a friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *